Midmark IQmark Digital ECG PDA Guida alla Risoluzione dei Problemi Scaricare il pdf (Pagina 24)

IQmark Diagnostic Workstation Operation Manual

In the configuration dialog box, you can choose Metric or English units of time and

measurement, and an AC power source frequency of 50 Hz or 60 Hz. The frequency

setting is necessary for the ECG module (if you have added it to your computer). Refer

to the ECG manual for information on frequency.

Once you are satisfied that the configuration selections are set appropriately, click OK to

save the settings. These settings are applied the next time the IQmark Diagnostic

Workstation is started or immediately if you make the changes from the New Test screen.

If you decide not to make changes to the configuration, simply click the Cancel button

and no changes are saved. You can also click the Default button to restore all settings to

the default values except for Institution Name and Address.

Serial Port

The serial port settings do not apply if you are using the USB version of the ECG or

Spirometry modules.

The configuration dialog box also enables you to select the Serial Port that is used by the

IQmark Digital ECG, Digital Spirometer, Vital Signs monitor and the weight scale.

Click the Serial Port button to open the following dialog box.

Serial Communications Port Setup

 NOTE: The default Communications Port is COM 1. If COM1 is not available,

the software enables you to Auto Detect the module on the serial ports

available.

To use Auto Detect, you must have the specific module connected to an available serial

port on the computer. Make sure the module is fully functional and click the Auto Detect

button on the left.

If you have a USB device connected, the Auto Detect button will not appear. Instead the

text USB Detected will be displayed (See the Spirometry COM Port area in Serial

Communication Port Setup image).

Back

Go To Table Of Contents

1 2 ... 19 20 21 22 23 24 25 26 27 28 29 ... 77 78

Nessun commento

Midmark IQmark Digital ECG PDA Guida alla Risoluzione dei Problemi Pagina 24